Durock Keyboard Stabilizers
Durock stabilizers steady the long keys on a mechanical keyboard. Match mount type first.
Updated . Edited by: Ilyass Ben Hakim.
Where to buy
- Search AmazonLive search · amazon.com
- Google ShoppingLive search · google.com
- Search eBayLive search · ebay.com
- Divinikey Durock V2 screw inLink · divinikey.com
Enthusiast keyboard shops stock Durock in kits and singles. Colors sell out often, so check several shops.
Professional insight
Keyboard builders pick stabilizers by PCB mount style first. Finish and color come later.
- Screw in stabs need threaded holes in the PCB.
- Count your 2u keys and spacebar size before ordering.
- Hot swap boards can still use screw in stabs.
- Plan to lube the wire ends to cut rattle.
Check the label
0 of 6 checked
Types
| Durock version | Notes |
|---|---|
| V2 screw in | Nylon housing, pre clipped, wire retention mold |
| V2 snap in | For PCBs without screw holes, less firm |
| V3 screw in | Newer stem mold, smaller wire gap |
| Plate mount | Clips into the plate, not the PCB |
Sizing
| Layout | Usual kit |
|---|---|
| 60% or 65% | 3 or 4 x 2u, 1 x 6.25u |
| TKL | 4 x 2u, 1 x 6.25u |
| Full size | 7 x 2u, 1 x 6.25u |
| Tsangan or WKL | Often 1 x 7u spacebar |
Count stabilized keys on your own layout. Split spacebars and ISO enter change the numbers.
Setup tips
- 1Lube the wire ends where they meet the stems.
- 2Add a thin dab of grease inside the housing.
- 3Place washers if your PCB back is uneven.
- 4Screw each stab in snugly, not overtight.
- 5Test each long key for rattle before adding switches.
Common questions
- Are Durock V2 stabs the same as Everglide or JWK V2?
- Some shops list the same design under several names. Check photos and specs.
- Do I need to clip them?
- Durock V2 comes pre clipped, so no trimming is needed.
- Will screw in stabs fit a plate only board?
- No. They need screw holes in the PCB.